The Electrical Equipment in Hazardous Areas course gives students the competency to undertake electrical work in a hazardous area and aligns to the requirements outlined in AS/NZS 4761 Competencies for working with electrical equipment for hazardous areas (EEHA).
Through the blended combination of theory and practical activities, participants will gain the knowledge and skills to report, inspect, install, maintain and attend breakdowns of electrical equipment in a potential explosive environment.
Our practical training facility, and portable onsite boards, allows the course participants to apply the knowledge gained in the classroom on functioning Hazardous Area (HA) equipment delivering a truly immersive competency based training experience.
AQF Qualification Title
$1,800 per person,
Mode of Delivery
Blended classroom delivery with theoretical instruction and practical activities.
Onsite delivery Australia wide.
Public or corporate courses at one of our training locations.
Please refer to specific course upon enrolment for the location.
Participants are typically required to hold a UEE30811 – Certificate III in Electrotechnology Electrician (Electrical Licence or equivalent) to be eligible to receive a full Statement of Attainment.
Restricted Electrical Licence holders and Electrical engineers may be eligible for full or partial Statement of Attainment. Please contact us for more information.
Instrumentation Technicians and Engineers may be eligible for a full or partial Statement of attainment. Please contact us for more information.
|Unit Code||Unit Name|
|UEENEEM080A||Report on the Integrity of Explosion-Protected Equipment in a Hazardous Area|
|UEENEEM020A||Attend to Breakdowns in Hazardous Areas – Gas Atmospheres|
|UEENEEM021A||Attend to Breakdowns in Hazardous Areas – Dust Atmospheres|
|UEENEEM022A||Attend to Breakdowns in Hazardous Areas – Pressurisation|
|UEENEEM024A||Install Explosion-Protected Equipment and Wiring Systems- Gas Atmospheres|
|UEENEEM025A||Install Explosion-Protected Equipment and Wiring Systems- Dust Atmospheres|
|UEENEEM026A||Install Explosion-Protected Equipment and Wiring Systems- Pressurisation|
|UEENEEM028A||Maintain Equipment in Hazardous Areas – Gas Atmospheres|
|UEENEEM029A||Maintain Equipment in Hazardous Areas – Dust Atmospheres|
|UEENEEM030A||Maintain Equipment in Hazardous Areas – Pressurisation|
|UEENEEM039A||Conduct Testing of Hazardous Area Installations – Gas Atmospheres|
|UEENEEM040A||Conduct Testing of Hazardous Area Installations – Dust Atmospheres|
|UEENEEM041A||Conduct Testing of Hazardous Area Installations – Pressurisation|
|UEENEEM042A||Conduct Visual Inspection of Hazardous Areas Installations|
|UEENEEM044A||Conduct Detailed Inspection of Hazardous Areas Installations- Gas Atmospheres|
|UEENEEM045A||Conduct Detailed Inspection of Hazardous Areas Installations- Dust Atmospheres|
|UEENEEM046A||Conduct Detailed Inspection of Hazardous Areas Installations- Pressurisation|
|21 - 24 September 2020||Perth (Canning Vale)||$1,800.00|
|5 - 8 October 2020||Perth (Canning Vale)||$1,800.00|
|2 - 5 November 2020||Perth (Canning Vale)||$1,800.00|
|16 - 19 November 2020||Bunbury||$1,800.00|
|23 - 26 November 2020||Perth (Canning Vale)||$1,800.00|
|15 - 18 December 2020||Perth (Canning Vale)||$1,800.00|